Escea IB600 Installation Manual download pdf (Page 24)

630184_4 IB Installation Manual NZ

21.0 Placing the fuel bed:

After replacing the firebox (if removed in 17.1) the fuel bed media can now be placed.

21.1 Locating the Log Set for IB600 & IB850:

1) Remove packaging from around log sets

2) Place rear log (long rectangular one) into position by inserting it in behind retainer

brackets at rear of fire box.

3) Place the front log sets into position over the top of the main burners. Use the log

template to properly locate the logs. The front edge of each log should have its front

edge directly behind the holes in the top of each burner which should follow the contours

of the logs.

Align logs to burner holes.

3) a

3) b

3) c

3) d

IB600 Logs

IB850 Logs

→ If you are installing logs into an IB600 or IB850 SEE SECTION 21.1

→ If you are installing logs into an IB1100 SEE SECTION 21.2

→ If you are installing a ceramic coal fuel bed SEE SECTION 21.3

→ If you are converting from logs to coals SEE SECTION 22.1

→ If you are converting from coals to logs SEE SECTION 22.2

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

No comments

Escea IB600 Installation Manual Page 24